The URL can be used to link to this page

Home My WebLink AboutSDS - Stainless Steel - Wieland Safety Data Sheet Page 1 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 Product Name: STAINLESS STEEL ALLOY Chemical Name: Metal Alloy Synonyms: Stainless Steel Alloys Chemical Family: Metal/Mixture Formula: Not applicable - mixture Product Use: Metallurgical Products Manufacturer: SDS Control Group Technical Information: Emergency Information: Wieland NA RA (618)258-5654 (618)258-5167 305 Lewis and Clark Blvd East Alton, IL 62024-1197 www.wieland.com United States (US) According to the OSHA 29 CFR 1910.1200 HCS Health hazards associated with this product only apply in a fume or dust form. Classification of the substance or mixture (Fume or Dust) OSHA HCS 2012 Flammability – 0 Health – 1 Physical – 0 Label Elements OSHA HSC 2012 Hazard Statements Causes skin irritation – H315 May cause respiratory irritation – H335 Precautionary statements Avoid breathing dust or fumes – P261 Prevention Avoid breathing dust or fumes – P261 Do not get in eyes, on skin, or on clothing – P262 In case of inadequate ventilation wear respiratory protection – P285 Response 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARD IDENTIFICATION Safety Data Sheet Page 2 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 EYE CONTACT: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. – P305 + P351 + P338. If eye irritation develops, Get medical advice/attention – P313 If eye irritation develops, Get medical advice/attention – P313 SKIN CONTACT: Rinse skin with water/shower – P353 Take off contaminated clothing and wash before reuse – P362 If skin irritation or rash develops, get medical advice/attention – P363 If skin irritation or rash develops, get medical advice/attention – P363 INHALATION: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing – P340 Get medical advice/attention – P313 INGESTION: Not a likely route of exposure for finished metal alloy. If dust is ingested, immediately drink water to dilute. Get medical advice/attention – P363 NOTE TO PHYSICIANS: There is no specific antidote to the active ingredients in this product; use symptomatic treatment. Other Hazards OSHA HSC 2012 Under United States Regulations (29 CFR 1910.1200 - Hazard Communication Standard), this product is considered hazardous. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Exposure to dust or fume may aggravate an existing dermatitis, asthma, emphysema, or other respiratory disease. Canada According to WHMIS Classification of the substance or mixture WHMIS This product is considered to be a manufactured article and therefore not subject to WHMIS requirements. Other Information NFPA Not rated CAS Number Components % By Weight EINECS/ ELINCS # EU Classification Symbol R-Phrase 7440-47-3 Chromium (non- hexavalent) 16 - 30 231-157-5 None None 7439-89-6 Iron 1 - 33 231-096-4 None None 7439-98-7 Molybdenum 1 - 5 231-107-2 None None 7439-96-5 Manganese 1 - 5 231-105-1 None None 7440-02-0 Nickel 6 - 25 231-111-4 Xn R 40-43 7440-21-3 Silicon 0.15– 2 231-130-8 None None OSHA REGULATORY STATUS: In solid form, not hazardous. Dust or fume: carcinogen, irritant, lung, blood, kidney, reproductive and developmental toxin, neurotoxin, sensitizer In solid form, this material is not hazardous. Dust and fumes are hazardous materials. 3. COMPOSITION/INFORMATION ON INGREDIENTS Safety Data Sheet Page 3 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 EYE CONTACT: Immediately flush out fume and dust particles with large amounts of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If eye irritation develops, call a physician at once. SKIN CONTACT: If exposed to dust or fumes, wash skin with plenty of water. Remove contaminated clothing and shoes and launder before reuse. If skin irritation or rash develops and persists or recurs, get medical attention. INHALATION: If symptoms of lung irritation occur (coughing, wheezing or breathing difficulty), remove from exposure area to fresh air immediately. If breathing has stopped, perform artificial respiration. Keep affected person warm and at rest. Get medical attention. INGESTION: Not a likely route of exposure for finished metal alloy. If dust is ingested, immediately drink water to dilute. Consult a physician if symptoms develop. NOTE TO PHYSICIANS: There is no specific antidote to the active ingredients in this product; use symptomatic treatment. PROPERTY VALUE PROPERTY VALUE Explosive No Flammable No Combustible No Pyrophoric No Flash Point (C): Not Applicable Burning Rate of Material Not Applicable Lower Explosive Limit: Not Applicable Auto Ignition Temp: Not Applicable Upper Explosive Limit: Not Applicable Flammability Classification: (Defined by 29 CFR 1910.1200) Not Applicable UNSUAL FIRE AND EXPLOSION HAZARDS: Dust may cause an ignitable and/or an explosive atmosphere. EXTINGUISHING MEDIA: For localized powder fires, smother with dry sand, dry dolomite, sodium chloride or soda ash. Use fire-extinguishing media appropriate to fight surrounding fire. SPECIAL FIREFIGHTING PROCEDURES: None required. FOR ALL TRANSPORTATION ACCIDENTS, CALL (618) 258-5167. In dust form, this product may be an explosion hazard. Remove all sources of ignition. Dust of fume may be suppressed by the use of a local exhaust system. Dispose of per guidelines under Section 13, WASTE DISPOSAL. HANDLING: Avoid dispersion of dust in air. STORAGE: No special requirements. Shelf Life Limitations: None known Incompatible Materials for Packaging: None known 4. FIRST AID MEASURES 5. FIRE FIGHTING MEASURES 6. ACCIDENTAL RELEASE MEASURES 7. HANDLING AND STORAGE Safety Data Sheet Page 4 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 CAS # CHEMICAL NAME ACGIH TLV OSHA PEL INTERNATIONAL OELS 7440-47-3 Chromium (non- hexavalent) 0.5 mg/m3 1 mg/m3 Belgium, Denmark, France, Japan, Netherlands, Sweden, U.K. – 0.5 mg/m3 Finland – 0.1 mg/m3 7440-02-0 Nickel 1.5 mg/m3 (inhalable) 1 mg/m3 Germany, MAK = 1 mg/m3 Canada (B.C.), Czechoslovakia, Denmark, Norway – 0.05 mg/m3, K1, sensitizer Poland = 0.25 mg/m3 Ireland, Sweden, Switzerland, U.K. = 0.5 mg/m3 Belgium, Canada (Alberta & others), Finland, Japan, Mexico, Netherlands –1 mg/m3 Portugal = 1.5 mg/m3 7439-89-6 Iron None established None established None established 7439-98-7 Molybdenum 10 mg/m3 (inhalable) 3 mg/m3 (respirable) None established None established 7439-96-5 Manganese 0.2 mg/m3 Ceiling – 5 mg/m3 Belgium, Denmark, Finland, France, Switzerland, U.K. – 1 mg/m3 Sweden – 2.5 mg/m3 Germany (MAK) – 0.5 mg/m3 7440-21-3 Silicon* 10 mg/m3 50 µg/m3 Belgium, Denmark, France, Netherlands, U.K. – 10 mg/m3 Switzerland – 4 mg/m3 *This substance is regulated by OSHA as a Particulate Not Otherwise Regulated (PNOR). The exposure limits listed for both OSHA and ACGIH refer to total dust; the OSHA PEL for the respirable fraction is 50 µg/m3. ENGINEERING CONTROLS: Local exhaust ventilation is recommended if significant dusting occurs or fumes are generated. Otherwise, use general exhaust ventilation. EYE / FACE PROTECTION: Use safety glasses. SKIN PROTECTION: Wear impervious (cut-resistant), gloves and other protective clothing (aprons, coveralls) as appropriate. If handling heated materials, use heat resistant gloves and clothing. Wash hands after handling. RESPIRATORY PROTECTION: Respiratory protection not normally needed. If dusting occurs or fumes are generated above the PEL/TLV, use a NIOSH-approved half-face or full-face respirator equipped with High Efficiency Particulate (HEPA) filter cartridges. GENERAL HYGIENE CONSIDERATIONS: Do not eat, drink, or smoke while using this product in dust form. Incompatible Materials for Storage or Transport: Store away from acids and incompatible materials. OTHER PRECAUTIONS: Do not shake clothing, rags or other items to remove dust. Dust should be removed by washing or HEPA vacuuming. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Safety Data Sheet Page 5 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 POTENTIAL EXPOSURE ROUTES: For dust: ingestion, inhalation, and eye contact. For fume: inhalation and eye contact. The finished alloy metal is not hazardous. ACUTE ANIMAL TOXICITY DATA: For Product: For Components Chromium Iron Molybdenum Nickel Manganese Silicon Oral LD 50 Believed to be > 5 g/kg 27.5 mg/kg (rat) 30 g/kg (rat) No data > 5 g/kg (rat) 9 g/kg (rat) 3.16 g/kg (rat) PROPERTY VALUE PROPERTY VALUE Appearance: Silvery metallic Vapor Density (air = 1): Not applicable Odor: None Boiling Point (°F): No data Molecular Weight: Not applicable - Mixture Melting point:: 1371 - 1454°C (2500 - 2650°F) Physical State: Solid Specific gravity (g/cc): 7.75 – 8.027 pH: Not applicable Bulk Density: 7.75 – 8.027g/cc Vapor Pressure (mm Hg): Not applicable Viscosity (cps): Not applicable Vapor Density: Not applicable Decomposition: Temperature: Not applicable Solubility in Water (20°C): Negligible Evaporation Rate: Not Applicable Volatiles, Percent by volume: Not applicable Octanol/water partition coefficient:: Unknown STABILITY: Stable under normal temperatures and pressure CONDITIONS TO AVOID: Avoid contact with carbon monoxide, particularly at temperatures between 50°C and 300°C, to prevent formation of nickel carbonyl which is toxic and a carcinogen. MATERIALS TO AVOID: Acetylene, chlorine HAZARDOUS DECOMPOSITION PRODUCTS: When heated to decomposition, may produce metal oxides and fumes. HAZARDOUS POLYMERIZATION: Will not occur. 10. STABILITY AND REACTIVITY 11. TOXICOLOGICAL INFORMATION Safety Data Sheet Page 6 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 Dermal LD 50 Believed to be > 2 g/kg No data No data No data > 7.5 g/kg (rabbit subcutaneous) No data No data Inhalation LC 50 Believed to be slightly to moderately toxic 87 mg/m3 (4 hrs, rat) No data No data > 12 mg/kg (rat, intratracheal) No data No data Irritation Eye and respiratory irritant Respiratory and nasal irritant Eye irritant No data Respiratory irritant, skin sensitizer Mild skin & eye irritant Eye, skin, respiratory irritant SUBCHRONIC/ CHRONIC TOXICITY: No information for product. CARCINOGENICITY: In laboratory animal studies, chronic exposure to high concentrations of nickel has caused an increase in lung and nasal tumors. The International Agency for Research on Cancer (IARC) has classified nickel as possibly carcinogenic to humans, group 2B. The National Toxicology Program (NTP) classifies nickel as a known human carcinogen. MUTAGENICITY: This product is not known or reported to be mutagenic. Nickel has been shown to be mutagenic in in vitro studies. REPRODUCTIVE, TERATOGENICITY, OR DEVELOPMENTAL EFFECTS: This product is not known or reported to cause reproductive or developmental effects. Exposure of male rats to high concentrations of nickel caused testicular degeneration. However, symptoms of systemic toxicity, including severe weight loss, were also observed at the same concentrations indicating that the testicular effects were secondary to the frank toxicity. NEUROLOGICAL EFFECTS: This product is not known or reported to cause neurological effects. Chronic exposure to very high concentrations of manganese dust has caused nervous system effects including muscle weakness, tremors, and behavioral changes in humans. INTERACTIONS WITH OTHER CHEMICALS WHICH ENHANCE TOXICITY: None known or reported. ECOTOXICITY: No data is available on this product. Individual constituents are as follows: Nickel: 96 hr LC 50 , rainbow trout =31.7 mg/L; 96 hr LC 50 , fathead minnow = 3.1 mg/L; 72 hr EC 50 , freshwater algae (4 species): = 0.1 mg/L; 96 hr LC 50 , Daphnia = 0. 51 mg/L Chromium: Daphnia magna, 48 hr. LC 50 = 0.022 mg/L; Fathead minnow, 96 hr LC 50 = 39 mg/L MOBILITY: No Data PERSISTANCE/DEGRADABILITY: No Data BIOACCUMULATION: No Data 12. ECOLOGICAL INFORMATION Safety Data Sheet Page 7 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 If this product becomes a waste, it DOES NOT meet the criteria of a hazardous waste as defined under 40 CFR 261, in that it does not exhibit the characteristics of hazardous waste of Subpart C, nor is it listed as a hazardous waste under Subpart D. Care must be taken to prevent environmental contamination from the use of this material. The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and non- hazardous wastes. This product may be a candidate for metal reclamation. US FEDERAL TSCA The components of this product are listed on the Toxic Substance Control Act inventory. CERCLA: Nickel, R.Q. = 100 lbs; Chromium, R.Q. = 5000 lbs. (No reporting is required if diameter of the pieces of metal is equal to or exceeds 100 micrometers (0.004 inches). (0.004 inches). SARA 313: Nickel, Chromium, Manganese SARA 313 Hazard Class: Health: For dust or fume only Acute – yes Chronic - yes Fire: None Reactivity: None Release of Pressure: None SARA 302 EHS List: None of the components of this product are listed. *RQ = Reportable Quantity STATE RIGHT-TO-KNOW STATUS Component *CA Prop. 65 New Jersey Pennsylvania Massachusetts Michigan Nickel X X X X X Chromium (non-hexavalent) Not listed X X X X Iron Not listed Not listed Not listed Not listed Not listed Molybdenum Not listed Not listed X X Not listed Manganese Not listed X X X Not listed Silicon X Not listed X X Not listed * “WARNING: This product contains detectable amounts of a chemical(s) known to the State of California to cause cancer and/or birth defects or other reproductive harm.” U.S. DOT RID/ADR IMDG IATA IMO Canada TDG PROPER SHIPPING NAME: Not regulated HAZARD CLASS: UN NO.: PACKING GROUP: LABEL: REPORTABLE QUANTITY: 13. DISPOSAL CONSIDERATIONS 14. TRANSPORTATION INFORMATION 15. REGULATORY INFORMATION Safety Data Sheet Page 8 of 8 Wieland NA RA SDS No.: 00018.0001 Stainless Steel Alloy Revision Date: 6/1/15 Review Date: 2/21/20 REVISIONS: Update to composition 1/1/04, revised format 6/1/15, updated silica standard 2/21/20 PREPARED BY: Wieland NA RA EUROPEAN REGULATIONS This material in its massive solid form is not required to be labeled under EC regulations. German WGK Classification: Unknown CANADIAN REGULATIONS DSL LIST: The components of this product are on the DSL or are exempt from reporting under the New Substances Notification Regulations. IDL: Manganese WHMIS: This product is considered to be a manufactured article and therefore not subject to WHMIS requirements. NOTICE: THE INFORMATION IN THIS SDS SHOULD BE PROVIDED TO ALL WHO WILL USE, HANDLE, STORE, TRANSPORT, OR OTHERWISE BE EXPOSED TO THIS PRODUCT. THIS INFORMATION HAS BEEN PREPARED FOR THE GUIDANCE OF PLANT ENGINEERING, OPERATIONS AND MANAGEMENT AND FOR PERSONS WORKING WITH OR HANDLING THIS PRODUCT. WIELAND NA RA BELIEVES THIS INFORMATION TO BE RELIABLE AND CURRENT AS OF THE DATE OF PUBLICATION, BUT MAKES NO WARRANTY THAT IT IS. This document reviewed annually 16. OTHER INFORMATION